Siding · Nashville, TN
Siding installation in Nashville: Hardie, vinyl and LP
James Hardie, vinyl and LP siding installed by Nashville contractors, with the wrap and flashing done properly underneath.
Estimate request
What is the siding on your house doing?
Straight to us, and a reply the same day.
Nashville's Siding
Nashville's Siding is a siding contractor based in Nashville, Tennessee, working 65 towns across 12 counties of Middle Tennessee. Siding contractors who wrap and flash the house before they clad it, and tell you what they found under the old boards.
More about who we are, what we commit to, and who answers for this site.
What we fix
Cracked boards, soft trim and paint that will not hold
Recognize one? You are in the right place.
- Siding cracked or warped
- Rot around windows
- Faded and chalky
- Paint it again or replace it
- Storm damage
- Wood siding needs constant work
Services
Hardie, vinyl, LP and the wrap underneath
Installation, replacement and repair — everything we handle, and what each one actually covers.
Fiber Cement (James Hardie)
Hardie plank and panel installed to spec — the fastener pattern and gap details the warranty actually depends on.
Learn more
Vinyl Siding
Insulated and standard vinyl in current profiles, hung so it can move without buckling.
Learn more
LP SmartSide & Wood
Engineered wood siding and trim for a real wood look with far less maintenance.
Learn more
Siding Repair
Storm, impact and woodpecker damage, plus rot repair where water has been getting behind.
Learn more
Trim, Soffit & Fascia
Wrapping and replacing the trim, soffit and fascia that usually fail before the siding does.
Learn more
House Wrap & Moisture
The weather barrier and flashing behind the siding — the part that decides whether the wall dries.
Learn moreHow it works
Strip it, fix what we find, wrap, flash and clad
Tell us what is happening
Send the form; describe it in your own words.
Get a free written estimate
One of our siding contractors looks at the work and gives you a scope and a price in writing, with no obligation to go ahead.
We do the work
Agreed price, tidy site, workmanship in writing. Not right afterwards? We come back.
Why trust us
What we put in writing before the old boards come off
No before-and-after photos from a stock library and no quoted customers this brand has not had; the proof will be houses in this region, shown as owners agree.
-
Wrap and flash first
House wrap, sill pans and window flashing before a single board goes up; that is where a siding job succeeds.
-
Price the sheathing
Rotten sheathing is replaced by the sheet at a number you saw in the quote.
-
Follow the manufacturer
Hardie, LP and vinyl each have an installation spec, and the warranty depends on following it.
-
Side over rot
New siding over soft sheathing looks fine for a year and then holds the water in.
-
Nail vinyl tight
Vinyl moves with heat; nailed tight it buckles in July.
-
Skip the trim details
The corners, the bottoms and the window returns are where siding fails; they are where the crew spends the time.
The Outside Story
Fresh off the wall at The Outside Story
October 8, 2026
Soffit Repair: Why Soffits Rot, Sag and Open Up
A stained, sagging or chewed soffit is almost never the first thing that went wrong. Fixing it means finding what got there first and keeping the attic’s air intake working.
Read itSeptember 28, 2026
Cleaning Green Mildew Off Siding Safely
Every humid summer leaves a green or black film on the shady side of the house. Getting it off is easy; getting it off without driving water behind the laps or stripping the finish takes some care.
Read itSeptember 21, 2026
Why Vinyl Siding Warps or Melts in One Spot
Vinyl siding does not melt in ordinary sun. When one patch has, something is focusing heat on it, and the usual culprit is a neighbor’s energy-efficient window.
Read itMiddle Tennessee
Sun, humidity and storms on a Nashville wall
A large share of Middle Tennessee homes built between the mid-1980s and the late 1990s were clad in hardboard composite siding, and that material is now failing across the region in a predictable way: swelling and crumbling at the bottom edge, behind gutters and under window sills, wherever water sat. Painting it again does not stop it, because the damage is in the board rather than in the film.
The regional climate is the reason fiber cement has become the default replacement here. Hot humid summers, hard driving rain and a genuine freeze-thaw cycle a few times each winter are exactly the conditions that move wood-based products, and the flashing details at windows, corners and the bottom course are what keep the wall assembly dry regardless of which material goes on it.
Service area
Houses we reside across Middle Tennessee
Nashville first, then 64 more towns in the 12 counties around it. Wherever a house stands in Middle Tennessee, up to an hour or so out of Nashville, our crews will reside it.
FAQ
Siding questions, from fiber cement to flashing
How much does siding cost in Nashville?
Siding in Nashville is priced per square of wall, by the product — vinyl, fiber cement, engineered wood — and by what is found under the old siding, which the quote should price per sheet of sheathing.
How fast can you get someone out?
A siding estimate in Nashville is usually within a week; the job is one to two weeks on a typical house once the material lands, and weather can stretch it.
What areas do you cover?
Siding crews working Nashville also cover Franklin, Brentwood, Murfreesboro, Hendersonville — 65 towns across 12 counties.
Are you licensed and insured?
Every siding crew we run carries liability insurance on file with us and holds the Tennessee contractor’s license the job value requires; the fiber-cement crews are trained on the product they install.
Do you charge for an estimate?
No — free, written, and no obligation.
What if something goes wrong afterwards?
Send the form; the workmanship is backed in writing.
How do I know if my siding needs replacing?
Cracked, warped or loose boards, rot at the bottom edges and around windows, and paint that will not hold are the visible signs. The one that matters most is soft wood at trim and window corners, because that means water is getting behind the cladding. Faded and chalky siding is usually a paint problem rather than a replacement one.
What is the difference between vinyl, Hardie and wood siding?
Vinyl is the least expensive and needs no painting but dents and fades. Fiber cement — Hardie — resists rot, insects and fire, holds paint well, and is the common choice in Middle Tennessee for that reason, but costs more to install because it is heavy and needs specific cutting. Wood looks best and costs the most to maintain, needing repainting every several years.
What drives siding replacement cost?
Square footage, material, and what is behind the old siding. Two-story walls need staging. The variable nobody can price in advance is sheathing rot found once the old siding comes off, which is common around windows and at the base of walls. Trim, soffit, fascia and house wrap are separate line items and are where quotes most often differ from one another.
Can siding be repaired rather than fully replaced?
Yes, where damage is localized and matching material is available. The difficulty is color: vinyl fades, and a replacement panel from the same product line rarely matches siding that has been on a wall for a decade. Repairs on an elevation that faces away from the street are usually acceptable; on the front, partial replacement often looks worse than the damage.
Why is there rot around my windows?
Almost always failed flashing or caulk letting water behind the cladding rather than the siding itself failing. Water gets in at the head or the sill, runs down inside the wall, and shows up as soft trim well after the leak started. Replacing the visible rotten trim without correcting the flashing means the same repair again in two or three years.
Free estimate
Is your siding past patching?
Tell Nashville's Siding what the walls look like and roughly how big the house is. We will walk it, check under a board or two and give you a written estimate, free.